FAQ Category: Powder Coating

Why can’t I add a service to my part?

Can’t add a service like bending/forming, countersinking, tapping, hardware insertion, deburring, anodizing, plating, or powder coating to your part after uploading your file to our website and selecting a material? There are a number of reasons why this might be the case. View the full FAQ to learn more.

Read More »

What metal colors do you offer?

At SendCutSend we stock over 15 different sheet metal types in a wide range of natural unfinished hues. Additionally, we offer anodizing, plating, and powder coating services that can provide red, yellow, gold, green, blue, white, and black surface finishes.

Read More »

Can I powder coat my bent or tapped part?

You can powder coat bent/formed and tapped parts. Please be aware that die witness marks from the press brake will be visible through the coating. Also, you will have to chase any tapped holes to clear the threads once you receive the parts.

Read More »

Haven’t found what you’re looking for?

Check out our the resources below or contact us at support@sendcutsend.com

Guidelines

Everything you need to know to design for laser-cutting, CNC routing, bending, and tapping.

Tutorials

Everything from software-specific tutorials to material selection tips.

Materials

We have sheet metals, plastics, composites, and wood/boards for every project.

Part Sizes

Min and Max part sizes for all our materials

Start your first SendCutSend project today!

Upload your CAD design or use our parts builder and get a free instant quote on your custom laser cut parts, all delivered to your door in a matter of days.
No CAD File? No Problem! Send your sketch or template to our Design Services team. Starting at $49.

We proudly use hardware by PEM

Flush Standoff, 4-40, .250" Zinc plus Clear Chromate

Aluminum: 5052, 6061, 7075 Steel: Mild, G30

SKUSO-440-8
Thread Size4-40 x .250″
Hole size in sheet (+0.003/-.0.000).168″
Minimum sheet thickness0.040″
Maximum sheet thickness.125″
Fastener materialSteel
Minimum distance hole C/L to edge0.230″
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole..345″
Recommended panel materialSteel/Aluminum
Coating typeZinc
Length.250″
Aluminum material ranges (5052, 6061, 7075)0.040″-0.125″
Steel material ranges (CRS, HRPO, HR)0.048″-0.119″

We proudly use hardware by PEM

Flush Standoff, 4-40, .250" Passivated

Stainless Steel: 304, 316

SKUSO4-440-8
Thread Size440
Hole size in sheet (+0.003/-.0.000).166″
Minimum sheet thickness0.04″
Maximum sheet thickness.125″
Fastener material400 Stainless Steel
Minimum distance hole C/L to edge0.230″
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. Example shown with x2 of the same hardware..313″
Recommended panel materialStainless Steel
Coating typePassivated
Length.250″
304 Stainless Steel material ranges0.048″-0.125″
316 Stainless Steel material ranges0.060″-0.125″