fbpx

NHRL + SendCutSend

For the beak on Spine Crawler to the flying wedge on Flip-N-Cut to the silly spinning weapon in Shreking Ball to the entire welded frame and top and bottom panels of PlyoHazard to the perfectly balanced welded weapon in Meta to the highly effective wedges on our minibots to the reliable weapons and wheels in Project LiftOff and Deep Melt we have used SendCutSend.  For literally thousands of cuts, we have relied on SendCutSend for their perfect cuts that always match our drawings, and benefitted from their quick turn-around and fast delivery. We have never been disappointed.

Jim Kazmer :: Team LiftOff

Claim your 10% discount

Enter your email to get your exclusive discount code. Keep reading to learn more about SendCutSend.

Custom laser cut parts. Delivered to your door, FAST.

Your easy online source for laser cutting CNC routing CNC bending powder coating waterjet cutting tapping countersinking pressfit hardware anodizing plating services.

Your easy online source for laser cutting. CNC routing. CNC bending. powder coating. waterjet cutting. tapping. countersinking. pressfit hardware. anodizing. plating.

Upload your CAD file or use our parts builder to get started.

Get your parts faster

It shouldn’t take weeks and $$ to get the parts you need. Upload your CAD design and we’ll make your custom parts in a few days – delivered right to your door.
No minimum quantities from SendCutSend
No minimum quantities

Order 1 or 1,000+. Get up to 70% off when you order in bulk.

No minimum quantities from SendCutSend
No minimum quantities

Order 1 or 1,000+. Get up to 70% off when you order in bulk.

SendCutSend's parts builder makes order simple parts easy
Multiple ways to order

Upload your CAD file, or use our Parts Builder and choose from a variety of templates.

SendCutSend's parts builder makes order simple parts easy
Multiple ways to order

Upload your CAD file, or use our Parts Builder and choose from a variety of templates.

Fast, Free shipping from SendCutSend
Free shipping!

Free anywhere in the USA, and only $19 to Canada.

Fast, Free shipping from SendCutSend
Free shipping!

Free anywhere in the USA, and only $19 to Canada.

Detailed order tracking from SendCutSend
Detailed order tracking

Follow your order from upload to delivery.

Detailed order tracking from SendCutSend
Detailed order tracking

Follow your order from upload to delivery.

Ordering your laser cut parts online has never been easier

Upload your design

Upload your CAD design

We accept
DXF, EPS, DWG & AI files.

Get an instant laser-cutting quote

Get an instant quote

Prices include materials, cutting,
deburring and free shipping
anywhere in the USA, $19 to Canada

Standard orders out the door
in 2-4 business days or less

3-5 day shipping
on all standard orders

Full Assembly parts from SendCutSend

Choose from a full range of services to cover all your project needs

From prototype to full assembly, we have you covered every step of the way. We have over 15 finishing options, an extensive hardware catalog, and more!

Laser, Water Jet and CNC cutting services from sendcutsend.com

Cutting Services

We offer custom laser cutting, waterjet cutting, and CNC routing. We’ll cut your parts with the method best suited for your material.

Bending & Forming

Add dimension to your projects with our precision CNC bending services.

Hardware Insertion from SendCutSent

Hardware Insertion

Select from our catalog of PEM press-fit hardware to add nuts, studs, and standoffs.

Tapping and Countersinking Services from SendCutSend

Countersinking & Tapping

Quickly and easily add threading to your parts

Anodizing & Plating

Enhance your custom laser cut parts with deburring, anodizing, and plating  services.

Online Powder Coating sevices from SendCutSend

Powder Coating

Give your laser cut parts a bold, long-lasting finish and protective layer in one of 7 colors

Get started with a free instant quote!

"SendCutSend is a trusted partner my business can grow with. It doesn’t matter if I need one component or 10,000. SCS will fulfill any order, and they’ll do it with a rock-solid cost and time frame up front. Their consistency allows me to produce a quality product representative of my craftsman business that will also generate a profit."

Our CNC laser cutting service is trusted by 1,000s of engineers, businesses, and manufacturers

MIT logo
Google logo
Blue Origin logo
Atlis logo
Disney logo
Icon logo
Stealth EV logo

Fast turn-arounds are only the begininng

Yes, we are laser-fast, but we’re also secure, and offer 100% money-back guarantee on all our parts. You’re in good hands with us.

Top notch customer service

Our educated and friendly team is here to answer your questions and assist you in getting the best parts possible.

Made in the USA

Every thing we offer, from materials to customer service is sourced right here in the United States. We have two locations to get your parts to you as quickly as possible.

Guaranteed quality

All our services come guaranteed. If you’re not 100% happy with your parts, we’ll give you a refund or remake on the spot.

Secure and confidential

We know your designs are valuable. Your files are 100% secure in our system.

No CAD file? Try our Parts Builder

If you don’t have a DXF file for laser cutting, no problem! You can now select, customize and order a variety of parts from simple brackets to house numbers in a matter of minutes.

SendCutSend's online part builder

Get started with a free instant quote!

See why customers dig us: SendCutSend reviews

Available Materials

"Starting from quoting, to ordering...ending in receiving goods, working with sendcutsend.com was by far the best experience we've ever had with purchasing parts"

Our Laser Cutting Service FAQs

What are best practices for minimum geometry?

Make sure all of the geometry in your laser cut part is at least 50% of the material thickness. As an example, if your material is 0.100” thick, the smallest hole you could expect to cut would be 0.050” in diameter. 

Any interior geometry smaller than 50% of the material thickness will not be cut accurately by the laser, and the integrity of the design will be lost in the machining process. We want to make sure your parts come out perfectly, so we provide all the resources necessary for you to help us make that happen. Our online laser cutting guidelines, max/min material charts, and our support team will give you all the additional information you need.

Read More »

What are common problems to look for in my files?

Before you upload your files to SendCutSend, make sure to check for these common problems. As an example, if your material is 0.100” thick, the smallest hole you could expect to cut would be 0.050” in diameter. A safe rule of thumb would be to keep all geometry greater than 1/2 material thickness, and

Read More »

What are your material size limits?

The minimum and maximum part size we offer changes depending on the material and its thickness. We have put together a chart broken down into four categories (Composites, Metals, Plastics, and Wood) so you can see all this information in the same place. 

Read More »

What are tabs? How can they be removed?

We use tabs to keep your parts from falling out of the parent sheet during laser cutting, waterjet cutting, or CNC routing. Micro Tabs in Laser and Waterjet Cut Materials For laser cut and waterjet cut materials, we cut a bit of additional material about 0.010”-0.015” thick on the outside of your parts to

Read More »

How do I order parts on your website?

We make ordering parts fast and convenient. For a step-by-step guide, check out this video or the steps listed below. How To Order Parts Upload your files or use our Parts Builder Step 1: Head to our homepage and click Get an Instant Quote or navigate to our quote page. Step 2: Drag and

Read More »

What is the size of your laser kerf?

We compensate for all kerf and line offsets in your design. We change the beam position based on the geometry of the part, and we are able to hold +/- .005″ tolerance or better on most materials. We take care of everything so you don’t have to. Our fiber laser beam diameter varies between roughly 0.006″ and 0.010” depending on the material being cut, but you do not need to make any adjustments to your design to compensate for the kerf in the laser cutter.

Read More »

What should I expect when I get a part powder coated?

Powder coating will add a 7-10 day lead time to your order. If you are ordering both powder coated and non-powder coated parts, split your order into two so we can ship your non-powder coated parts as soon as they’re done being machined.  If your powder coated parts are bent, be aware that the

Read More »
SendCutSend Shop Tour video thumbnail
Play Video

About SendCutSend

Helping you tackle projects that were impossible before.

Our founders, Jim and Jake, were always working on projects in their garage. They used the tools they had laying around to get the job done, but with compromises. When they tried to up their fabrication game by using custom made laser cut parts, none of the local shops wanted the work.

So they set out to find a new way, and SendCutSend was born.

Start your first project today!

Upload your CAD design or use our parts builder and get a free instant quote on your custom laser cut parts, all delivered to your door in a matter of days.

We proudly use hardware by PEM

Flush stud, M8 x 1.25, .472" Zinc plus Clear Chromate

Aluminum: 5052, 6061, 7075 Steel: Mild

SKUFH-M8-12
Thread SizeM8 x 1.25
Hole size in sheet (+0.003/-.0.000).315″
Minimum sheet thickness0.94″
Maximum sheet thickness.347″
Fastener materialSteel
Minimum distance hole C/L to edge0.378″
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole..567″
Recommended panel materialSteel/Aluminum
Coating typeZinc
Length.472″
Aluminum material ranges (5052, 6061, 7075)0.100″-0.250″
Steel material ranges (CRS, HRPO, HR)0.104″-0.250″

Get an Instant Quote for Waterjet Cutting

We proudly use hardware by PEM

Flush Standoff, 4-40, .250" Zinc plus Clear Chromate

Aluminum: 5052, 6061, 7075 Steel: Mild, G30

SKUSO-440-8
Thread Size4-40 x .250″
Hole size in sheet (+0.003/-.0.000).168″
Minimum sheet thickness0.040″
Maximum sheet thickness.125″
Fastener materialSteel
Minimum distance hole C/L to edge0.230″
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole..345″
Recommended panel materialSteel/Aluminum
Coating typeZinc
Length.250″
Aluminum material ranges (5052, 6061, 7075)0.040″-0.125″
Steel material ranges (CRS, HRPO, HR)0.048″-0.119″

We proudly use hardware by PEM

Flush Standoff, 4-40, .250" Passivated

Stainless Steel: 304, 316

SKUSO4-440-8
Thread Size440
Hole size in sheet (+0.003/-.0.000).166″
Minimum sheet thickness0.04″
Maximum sheet thickness.125″
Fastener material400 Stainless Steel
Minimum distance hole C/L to edge0.230″
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. Example shown with x2 of the same hardware..345″
Recommended panel materialStainless Steel
Coating typePassivated
Length.250″
304 Stainless Steel material ranges0.048″-0.125″
316 Stainless Steel material ranges0.060″-0.125″