For the beak on Spine Crawler to the flying wedge on Flip-N-Cut to the silly spinning weapon in Shreking Ball to the entire welded frame and top and bottom panels of PlyoHazard to the perfectly balanced welded weapon in Meta to the highly effective wedges on our minibots to the reliable weapons and wheels in Project LiftOff and Deep Melt we have used SendCutSend. For literally thousands of cuts, we have relied on SendCutSend for their perfect cuts that always match our drawings, and benefitted from their quick turn-around and fast delivery. We have never been disappointed.
Enter your email to get your exclusive discount code. Keep reading to learn more about SendCutSend.
Upload your CAD file or use our parts builder to get started.
Order 1 or 1,000+. Get up to 70% off when you order in bulk.
Order 1 or 1,000+. Get up to 70% off when you order in bulk.
Upload your CAD file, or use our Parts Builder and choose from a variety of templates.
Upload your CAD file, or use our Parts Builder and choose from a variety of templates.
Free anywhere in the USA, and only $19 to Canada.
Free anywhere in the USA, and only $19 to Canada.
Follow your order from upload to delivery.
Follow your order from upload to delivery.
We accept
DXF, EPS, DWG & AI files.
3-5 day shipping
on all standard orders
From prototype to full assembly, we have you covered every step of the way. We have over 15 finishing options, an extensive hardware catalog, and more!
We offer custom laser cutting, waterjet cutting, and CNC routing. We’ll cut your parts with the method best suited for your material.
Add dimension to your projects with our precision CNC bending services.
Select from our catalog of PEM press-fit hardware to add nuts, studs, and standoffs.
Enhance your custom laser cut parts with deburring, anodizing, and plating services.
Give your laser cut parts a bold, long-lasting finish and protective layer in one of 7 colors
Yes, we are laser-fast, but we’re also secure, and offer 100% money-back guarantee on all our parts. You’re in good hands with us.
Our educated and friendly team is here to answer your questions and assist you in getting the best parts possible.
Every thing we offer, from materials to customer service is sourced right here in the United States. We have two locations to get your parts to you as quickly as possible.
All our services come guaranteed. If you’re not 100% happy with your parts, we’ll give you a refund or remake on the spot.
We know your designs are valuable. Your files are 100% secure in our system.
If you don’t have a DXF file for laser cutting, no problem! You can now select, customize and order a variety of parts from simple brackets to house numbers in a matter of minutes.
Our pricing is based on a number of factors, including material, material thickness, material weight, quantity, shape (geometry), and the overall design. Follow these tips to get the lowest prices on your laser cut parts: Reduce the number of holes or “pierces” Eliminate duplicate lines and unnecessary geometry Keep your design smaller than 46”
Yes, you can powder coated bent and tapped parts but there are a few things to know. If your powder coated parts are bent, be aware that the die witness marks from the press brake will be visible through the coating. At this time, we cannot plug tapped holes before the parts are powder
Our pre-flight checklist for file setup applies to all our services. Make sure all your part files fit within these guidelines before you send them to us, and we’ll be able to get your parts to you faster and easier. Don’t forget to read up on all our services guidelines as well to make
Materials behave differently during machining, with capabilities and limitations that vary between materials and their thicknesses. That’s why it’s important to understand the tolerance of specific materials when designing your projects to be laser cut. Before uploading your design to our website check out our general maximum and minimum limitations for all of our
Although we cut and process parts seven days a week, we review orders Monday through Friday to coincide with our shipping carriers. Here’s how our process works: Your order is received and verified Our Application Engineers review your drawings Your drawings are programmed and scheduled – This is when you will receive an estimated
We treat every order as a rush order. We are unable to speed up our production, but we may be able to offer expedited shipping in some cases. Use these ordering tips to get your parts as quickly as possible and to learn more about our production time.
We cut and process parts seven days a week, but we review orders Monday through Friday. There are a few things that could potentially slow down your order. Orders received after noon PST will be processed the next business day Orders with notes, special requests etc. will have additional processing time. Drawings that include
SendCutSend offers a number of high-quality materials in various thicknesses for bending: Bending can be tricky to design for, but it doesn’t have to be. The best way to ensure quick and simple sheet metal bending is to follow our bending and forming guidelines. If you have any questions, don’t hesitate to reach out
Our founders, Jim and Jake, were always working on projects in their garage. They used the tools they had laying around to get the job done, but with compromises. When they tried to up their fabrication game by using custom made laser cut parts, none of the local shops wanted the work.
So they set out to find a new way, and SendCutSend was born.
This June, Spend $1,000 or more at checkout, you’ll receive 5% off instantly + a $200 gift card towards a future purchase.
"*" indicates required fields
We proudly use hardware by PEM
| SKU | SO-440-8 |
| Thread Size | 4-40 x .250″ |
| Hole size in sheet (+0.003/-.0.000) | .168″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .125″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge | 0.230″ |
| When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. | .314″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .250″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.119″ |
