Proudly made in the USA
icon-flag
GET STARTED
LOGIN

Anodizing services

3 Materials

5 Type II colors

+7-10 days

Production Time

Get instant pricing
benefits
Materials
colors
guidelines
what to expect

Anodizing sizing and options

Part Sizes
1" x 3"
Min part size sheet
23" x 23"
Max part size sheet
1" x 3" x 1"
Min part size billet
7" x 7" x 12"
Max part size billet
C.
.063" diameter
Required hole
4 MATERIALS, .063" - .750"
5052 H32 Aluminum6061 T6 Aluminum6061 T6 Aluminum Billet7075 T6 Aluminum
Available Type II Colors
ClearBlackBlueGoldRed

Fast turnarounds to keep your projects moving

SendCutSend offers online anodizing services on flat sheet metal and CNC Machined parts with no minimum quantity.
powder-scroller
blue-powder-bends
pc-muulti-stack2
gray-pow-gaskets
dimple-wrinkle-pow-1

Corrosion resistance

Increases resistance to corrosion without adding a thick layer to your part

Pair with 7 post-processing services

Anodizing pairs well with a variety of our other sheet metal or CNC machining services

Tight-tolerance friendly

Adds only 0.0002″–0.0009″ per side, so anodizing won't affect fit on parts with mating surfaces or threaded features.

“One of the biggest surprises was their anodizing quality—not only was it significantly more affordable than I expected, but the finish was also top-tier.”

Chase Doney

Available materials for Anodizing

Many non-ferrous metals can be anodized, but aluminum is the best candidate and creates the most successful finish. At this time, we offer three different aluminum alloys for sulfuric anodizing:

For a full list of materials and available thicknesses, please visit our materials page.

One step to a finished part
Built to take abuse
Looks as good as it performs

5052 H32 Aluminum

10 thicknesses: .063" – .500"

6061 T6 Aluminum Billet

CNC Machined

6061 T6 Aluminum

11 thicknesses: .063" – .750"

7075 T6 Aluminum

3 thicknesses: .125" – .250"

Added durability in a variety of colors

Anodizing adds 3-5 days to production. For the fastest lead time, order anodized parts separately.

Black

Type II, Class II
MIL-A-8625

Clear

Type II, Class I
MIL-A-8625

Blue

Type II, Class II
MIL-A-8625

Gold

Type II, Class II
MIL-A-8625

Red

Type II, Class II
MIL-A-8625

*Colors may vary by batch. Click swatches to view.

Upload now for instant pricing

Anodizing adds 3-5 days to production. For the fastest lead time, order anodized parts separately.

Get Started

Affordable pricing. Up to 70% off in bulk.

5052 Aluminum .125"

4 x 3.25 in

Laser cutting, bending, countersinking, deburring, anodizing

Qty 1:

$41.58/ea

Qty 100:

$12.86/ea

5052 H32 Aluminum .090"

6.5 x 7.5 in

Laser cutting, bending, ctapping, dimple forming, deburring, anodizing

Qty 1:

$72.63/ea

Qty 100:

$24.62/ea

6061 T6 Aluminum Billet

2.5 x 2.5 in

CNC machining, media blasting, anodizing

Qty 1:

$357.23/ea

Qty 100:

$73.32/ea

Design guidelines for anodized parts

Following a few basic design guidelines will help ensure your parts anodize properly and pass SendCutSend review.

Sizing & hole requirements

Sizing limits apply to flat parts  before bending for sheet metal

Sheet Metal

Min part size (flat)1″ x 3″ (≥ 3 in² surface area)
Max part size (flat)23″ x 23″
Required hanging hole≥ .063″ (1.60 mm)
Min hole / cutout size ≥ .040″ (1.02 mm)

CNC Machined Billet

Min part size (flat) 1″ x 3″ x 1″
Max part size (flat) 7″ x 7″ x 12″
Required rack feature One ≥ .125″ through hole (best), or a threaded blind hole ≥ 4-40 / 3mm with ≥ 1.5× diameter depth
  • If your billet design can’t accommodate a hole, we can pinch opposing surfaces during racking.
  • Expect small marks of discoloration at pinch points. You can specify preferred surfaces in your order note during configuration.
  • If your material’s min hole size is larger than .063″, the hanging hole must match that larger size. Verify in the Material Catalog.
  • Deburring is preselected on all anodized sheet metal parts. Media blasting is strongly recommended for billet.

What to expect with anodized parts

  • Some surface imperfections may be visible through the anodizing
  • Color finishes may vary batch to batch, and significantly between alloys
  • 7075 T6 Aluminum will appear duller with more contrast between face and cut edge
  • Bend lines will be visible (die protection isn’t available)
  • Anodizing is non-conductive
  • Scratches will expose raw aluminum beneath
  • Type II anodizing adds ~0.0002″–0.0009″ per side to part dimensions
    Parts requiring welding should not be anodized
  • Without deburring (sheet) or media blasting (billet), all imperfections are enhanced

Additional anodizing resources

If you’re designing parts for anodizing, these resources may help:

Pre-flight checklist: Sheet Metal

  • File is in a format that we accept (2D: .dxf, .dwg, .ai, .eps; 3D: .step or .stp)
  • All holes and cutouts are at least 50% material thickness for laser cut parts
  • All holes and cutouts are no less than 0.070” for most waterjet cut parts
  • All holes and cutouts are no less than 0.125” for all CNC routed parts
  • File is built at a 1:1 scale, preferably in inch or mm units
  • All objects are on the same layer
  • All stray points, duplicate lines, empty objects and text areas have been removed
  • No shapes have open contours
  • All shapes have been united, combined or merged
  • All text has been converted to outlines or paths
  • Cut-out text (reversed text) has bridges or has been stencilized

Pre-flight checklist: CNC Machined Billet

  • File is in a format that we accept for CNC machining (.step or .stp)
  • Only one part is present in your design file (no assemblies)
  • File is built at a 1:1 scale in either inch or mm units
  • File does not include any extra faces or entities
  • No holes or features are smaller than .125” (3.175mm)
  • Internal features will have a minimum radius of .0625” (1.587mm)
  • All internal features are accessible (e.g., not fully enclosed)
  • No part marking, etching, or engraving included in the design

SendCutSend reviews

Customers love getting their sheet metal parts from us

View on Google

Top Quality Store

Please note: Pricing examples on our website are provided as general estimates and may not always reflect current prices. While we strive to keep these examples accurate, uploading your file is the best way to see instant current pricing.

Start your first SendCutSend project today!

Upload your CAD design, or try one of our customizable part templates to get instant pricing on your custom laser cut parts. All delivered to your door in a matter of days.

Upload a CAD file

We accept .ai, .dxf, .dwg, .eps, .stp, and .step

Use our Parts Builder

Customize one of our simple parts templates
GET STARTED

Get instant pricing for anodizing

Before you upload, be sure your file meets our requirements:
VIEW ANODIZING GUIDELINES
UPLOAD MY FILE