Very high quality finish. Laser-cut aluminum with a bend, and with black anodized finish came out beautifully, and all nicely packaged too. Will 100% use again.
Anodizing your laser cut parts can add durability and character. The anodizing process increases corrosion resistance without adding a thick layer of material to your part.
Type II, Class II
MIL-A-8625
Type II, Class I
MIL-A-8625
Type II, Class II
MIL-A-8625
Type II, Class II
MIL-A-8625
Type II, Class II
MIL-A-8625
Colors may vary by batch. Click swatches to view.
4 x 4″
Laser Cutting, Anodizing, Deburring
6 x 4″
Laser Cutting, Bending, Anodizing, Hardware, Deburring
5.3 x 7.25″
Laser Cutting, Anodizing, Deburring
Size: 3.9 x 3.9″
Laser Cutting, Anodizing, Deburring
Size: 2.344 x 2.344 x 1.1″
CNC Machining, Media Blasting, Anodizing
Size: 5.3 x 7.25″
Laser Cutting, Bending, Anodizing, Deburring
We accept .ai, .eps, .dwg, .dxf, step, and .stp
Upload your part, select your material, and choose your anodizing color in just a few clicks.
Make sure your file meets our requirements and get your parts as quickly as possible.
Make sure your file meets our requirements and get your parts as quickly as possible.
Choose your material, anodizing color, and quantity to see live pricing and shipping updates.
We accept .dxf, .dwg, .eps, .step, .stp, or .ai file for instant pricing. We offer our Parts Builder if you don’t have a file available.
Standard production on anodizing orders is 7-10 days with 1-3 day shipping.
We accept .dxf, .dwg, .eps, .step, .stp, or .ai file for instant pricing. We offer our Parts Builder if you don’t have a file available.
Choose your material, anodizing color, and quantity to see live pricing and shipping updates.
Standard production on anodizing orders is 7-10 days with 1-3 day shipping.
Get started on your project with the click of a button. Whether you have a CAD file, a sketch, or just an idea.
Before you upload your design, take a look at our file preparation guidelines. They cover everything you need to know including file setup, sizing, supported formats, and tips for keeping costs down, so you can get the best results from your laser cut parts.
Custom laser cutting, waterjet cutting, and CNC routing. We’ll cut your parts with the method best suited for your sheet or plate material.
2-4 days standard production
Multiaxis CNC machining in billet stock. This subtractive process uses precise machining to sculpt blocks of raw metal into nearly anything you can imagine.
2-4 days standard production
Add dimension to your projects with our precision CNC bending services.
+1-2 days | 10 materials
Allow hardware to sit flush on your parts to reduce wear and tear.
+1-3 days | 6 materials
Strengthen material with aesthetically pleasing dimples.
+1-3 days | 7 materials
Select from our catalog of PEM press-fit hardware to add nuts, studs, and standoffs.
+1-3 days | 8 materials
Quickly and easily add threading to allow for the addition of hardware to your parts.
+1-3 days | 13 materials
We offer Class II anodizing services to add durability and character to your laser cut parts.
+7-10 days | 4 materials
This process removes small imperfections, scratches, and burr left over from the cutting process.
+0 days | 8 materials
Increase rust prevention, wear resistance, and strength with zinc and nickel plating.
+7-10 days | 3 materials
Give your laser cut parts a bold, long-lasting finish and protective layer in one of 7 colors, 4 finishes
+3-5 days | 10 materials
Reduce the surface blemishes and handling scratches found in raw materials.
+1-2 days | 11 materials
We take pride in our customer service, quality, and continual innovation with new products and services. You’re in good hands with SendCutSend.
Top Quality Store
Please note: Pricing examples on our website are provided as general estimates and may not always reflect current prices. While we strive to keep these examples accurate, uploading your file is the best way to see instant current pricing.
Anodizing adds a very thin layer, about 0.0002″ to 0.001″ so for most applications, it won’t noticeably affect your part’s dimensions. If you’re working with tight tolerances, it’s a good idea to account for that added layer.
Every anodized part needs at least one hole that’s 0.063″ or larger for processing. If your part has tiny features or no holes, it may need design adjustments to qualify for anodizing with SendCutSend. You can learn more about our requirements for anodizing in our anodizing guidelines.
Anodizing adds about 7 to 10 business days to your order’s production time. For faster turnaround, we recommend placing anodized parts in a separate order from non-anodized items.
