Online Tumbling services

10 Materials

.119"- .500" Thick

+1-2 days

Production Time

Tumbling sizing and options

Part Sizes

.5" x 1.5"

Min part size

4" x 7"

Max part size

10 MATERIALS, .119”-.500”

5052 H32 Aluminum6061 T6 Aluminum7075 T6 AluminumBrass4130 ChromolyCopperMild Steel304 Stainless Steel316 Stainless SteelGrade 5 Titanium

Compatible Services

Laser CuttingBendingCountersinkingHardware InsertionTapping

Fast turnarounds to keep your projects moving

Clean up sharp edges and give your parts a consistent finish. Tumbling makes parts safer to handle and ready for the next step.

Remove burr and sharp edges

Tumbling ensures uniform removal and smoothing of machined components

Cost-effective for mass finishing

Tumble multiple components in a single cycle.

In-house production

Tumbling adds just 1–2 days to standard production times.

“It was too easy and super fast from start to finish. My finished part came even BETTER than I expected it would.”

Jesse Gatdula

Available materials for Tumbling

Tumbling is available on a variety of materials at a minimum of 0.119″ thickness

One step to a finished part
Built to take abuse
Looks as good as it performs

5052 H32 Aluminum

6 thicknesses: .125" – .500"

6061 T6 Aluminum

7 thicknesses: .125" – .750"

7075 T6 Aluminum

3 thicknesses: .125" – .250"

Brass

3 thicknesses: .125" – .250"

4130 Chromoly

3 thicknesses: .125" – 250"

Copper

3 thicknesses: .125" – .250"

Mild Steel

7 thicknesses: .119" – .500"

304 Stainless Steel

5 thicknesses: .125" – .500"

316 Stainless Steel

3 thicknesses: .125" – .250"

Grade 5 Titanium

3 thicknesses: .125" – .250"

Upload now for instant pricing

Tumbling coating adds 1-2 days to production. For the fastest lead time, order tumbled parts separately.

Affordable pricing. Up to 80% off in bulk.

6061 Aluminum .125"

3.5 x 2.5 in

Laser cutting, tumbling

Qty 1:

$16.06/ea

Qty 100:

$3.08/ea

4130 Chromoly .125"

3.75 x 4 in

Laser cutting, tumbling

Qty 1:

$29.82/ea

Qty 100:

$8.11/ea

Cold Rolled Carbon Steel

5 x 2 in

Laser cutting, bending, tumbling

Qty 1:

$30.13/ea

Qty 100:

$4.84/ea

Design guidelines for tumbled parts

Following a few basic design guidelines will help ensure your parts are tumbled properly and pass SendCutSend review.

Sizing & hole requirements

Sizing limits apply to flat parts before bending

Min part size (flat)	.5″ x 1.5″
Max part size (flat)	4″ x 7″
Min material thickness	.119″

Thin or fragile parts may bend during tumbling. For those, use linear deburring instead.
Verify min hole sizes for your material in the Material Catalog
Need to check sizes for other services? See our Processing Min/Max Size Charts

What to expect with tumbled parts

Purpose: Tumbling is for deburring and edge softening only, not cosmetic finishing.
Edge softening: Cannot be precisely controlled. Expect rounded, uniform edges, not a specific radius.
Holes and cutouts: Features smaller than 0.5″ won’t be fully processed inside.
Surface finish: Will not be cosmetically perfect. Consistency between separate orders is not guaranteed.
Fragile geometry: Unsupported features will bend. Not recommended for thin or delicate parts.
Combined finishes: For tumbling plus anodizing, plating, or powder coating, submit a custom quote request.

Additional tumbling resources

If you’re designing parts for tumbling, these resources may help:

Pre-flight checklist

File is in a format that we accept (2D: .dxf, .dwg, .ai, .eps; 3D: .step or .stp)
All holes and cutouts are at least 50% material thickness for laser cut parts
All holes and cutouts are no less than 0.070” for most waterjet cut parts
All holes and cutouts are no less than 0.125” for all CNC routed parts
File is built at a 1:1 scale, preferably in inch or mm units
2D files: all objects on the same layer, text converted to outlines, no open contours, all shapes united or merged, floating interiors bridged or stencilized
3D files: single solid sheet metal body, uniform thickness with a face at every edge, modeled at stock thickness with matching bend specs
All stray points, duplicate lines, empty objects and text areas have been removed

SendCutSend reviews

Customers love getting their sheet metal parts from us

         Posted on Google  
   
   Drew Michael 
 October 28, 2026.
 
 
  Ryan at SendCutSend was a huge help on our bus bar design. He got back to me quickly every time and was willing to work through some very specific design constraints with me. You can tell he cares about getting the part right, and ensuring that our order will be made correctly. Thanks to him, we got our bus bars locked down with confidence. Great customer service, he took the extra step to attend to my requests, and I’d definitely work with him again!
  
 
      Posted on Google  
   
   Matthew Thomas 
 October 28, 2026.
 
 
  This is a cool service.  Glad it exists.
  
 
      Posted on Google  
   
   Greg Rieffenberger 
 October 28, 2026.
 
 
  My cut part showed up on time and exactly as described. There were some issues with the file I sent over, but the team at SCS worked quickly with me to get it fixed and make sure my part got to me on time.
  
 
      Posted on Google  
   
   Valerie Ehret 
 October 27, 2026.
 
 
  Fast friendly service. Parts turned out exactly as I had hoped!
  
 
      Posted on Google  
   
   Imerio Palumbo 
 October 27, 2026.
 
 
  I’ve been using their products for years and always satisfied. On the last order I made a mistake in the shipment address and Julie was incredibly helpful fixing it. Avoiding me to deal directly with UPS which would have been a nightmare. Great team.
  
 
      Posted on Google  
   
   Tommy Erhardt 
 October 27, 2026.
 
 
  Game changer for quick-turn Made in USA custom parts!
Quoting and ordering through their site couldn't be easier, takes less than a few minutes from file upload to checkout. Parts arrived ahead of schedule, perfectly deburred, quality finish and within tolerances. Fantastic pricing for quick turn US-made parts.
  
 
      Posted on Google  
   
   Jake Seifert 
 October 26, 2026.
 
 
  Always great parts shipped quickly, and the candy they ship long with the parts is always welcome! Corie just helped me with an ordering mistake I made, and the process was seamless. Great customer service and an extremely easy to use website. Love SCS.
  
 
      Posted on Google  
   
   Brian Williams 
 October 26, 2026.
 
 
  I had a small order. It was just a test to see if the pattern would work. They needed to have me adjust the print, and gave me a call because I typed my email in incorrectly. Very nice to deal with. Fantastic customer service I must say. The plywood that I had cut was perfectly done. Thanks!
  
 
      Posted on Google  
   
   Jeffrey Stone 
 October 26, 2026.
 
 
  I've been using SendCutSend for a few years and am never disappointed.

Two thumbs up.
  
 
  
  
   Google rating score: 5.0 of 5, based on 3547 reviews

Top Quality Store

Please note: Pricing examples on our website are provided as general estimates and may not always reflect current prices. While we strive to keep these examples accurate, uploading your file is the best way to see instant current pricing.

Start your first SendCutSend project today!

Upload your CAD design, or try one of our customizable part templates to get instant pricing on your custom laser cut parts. All delivered to your door in a matter of days.

Upload a CAD file

We accept .ai, .dxf, .dwg, .eps, .stp, and .step

Use our Parts Builder

Customize one of our simple parts templates

Online Tumbling services

10 Materials

+1-2 days

Tumbling sizing and options

Part Sizes

10 MATERIALS, .119”-.500”

Compatible Services

Fast turnarounds to keep your projects moving

Remove burr and sharp edges

Cost-effective for mass finishing

In-house production

Jesse Gatdula

Available materials for Tumbling

One step to a finished partBuilt to take abuseLooks as good as it performs

5052 H32 Aluminum

6061 T6 Aluminum

7075 T6 Aluminum

Brass

4130 Chromoly

Copper

Mild Steel

304 Stainless Steel

316 Stainless Steel

Grade 5 Titanium

Upload now for instant pricing

Affordable pricing. Up to 80% off in bulk.

6061 Aluminum .125"

Qty 1:

$16.06/ea

Qty 100:

$3.08/ea

4130 Chromoly .125"

Qty 1:

$29.82/ea

Qty 100:

$8.11/ea

Cold Rolled Carbon Steel

Qty 1:

$30.13/ea

Qty 100:

$4.84/ea

Design guidelines for tumbled parts

Sizing & hole requirements

What to expect with tumbled parts

Additional tumbling resources

Pre-flight checklist

SendCutSend reviews

Customers love getting their sheet metal parts from us

Start your first SendCutSend project today!

Upload your CAD design, or try one of our customizable part templates to get instant pricing on your custom laser cut parts. All delivered to your door in a matter of days.

Upload a CAD file

Use our Parts Builder

One step to a finished part
Built to take abuse
Looks as good as it performs