We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | S-440-1 |
| Thread Size | 4-40 |
| Hole size in sheet (+0.003/-.0.000) | .166″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | N/A |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.250″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .335″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Thickness (T) above material after install | .070″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SP-440-1 |
| Thread Size | 4-40 |
| Hole size in sheet (+0.003/-.0.000) | .166″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | N/A |
| Fastener material | A236 Hardened Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.313″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .503″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated and/or tested |
| Thickness (T) above material after install | .070″ |
| 304 Stainless Steel material ranges | 0.048″-0.375″ |
| 316 Stainless Steel material ranges | 0.060″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061 Steel: Mild, G90
| SKU | F-440-1 |
| Thread Size | 4-40 |
| Hole size in sheet (+0.003/-.0.000) | .061″ |
| Minimum sheet thickness | 0.059″ |
| Maximum sheet thickness | 0.090″ |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.250″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .281″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.090″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.074″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | F-440-2 |
| Thread Size | 4-40 |
| Hole size in sheet (+0.003/-.0.000) | .091″ |
| Minimum sheet thickness | 0.090″ |
| Maximum sheet thickness | N/A |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.250″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .296″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.090″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.104″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061 Steel: Mild, G90
| SKU | F-M2.5-1 |
| Thread Size | M2.5 x 0.45 |
| Hole size in sheet (+0.003/-.0.000) | 0.061″ |
| Minimum sheet thickness | 0.059″ |
| Maximum sheet thickness | 0.090″ |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.250″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .281″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.63″-0.090″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″ – 0.074″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | F-M2.5-2 |
| Thread Size | M2.5 x 0.45 |
| Hole size in sheet (+0.003/-.0.000) | .091″ |
| Minimum sheet thickness | 0.090″ |
| Maximum sheet thickness | N/A |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.250″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .296″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.090″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.104″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | S-632-1 |
| Thread Size | 6-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | 0.187″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | N/A |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .345″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Thickness (T) above material after install | .070″ |
| Aluminum material ranges (5052,6061,7075) | 0.040″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SP-632-1 |
| Thread Size | 6-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | 0.188″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | N/A |
| Fastener material | A236 Hardened Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .313″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .533″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated and/or tested |
| Thickness (T) above material after install | .070″ |
| 304 Stainless Steel material ranges | 0.048″-0.375″ |
| 316 Stainless Steel material ranges | 0.060″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061 Steel: Mild, G90
| SKU | F-632-1 |
| Thread Size | 6-32 |
| Hole size in sheet (+0.003/-.0.000) | .061″ |
| Minimum sheet thickness | 0.059″ |
| Maximum sheet thickness | 0.090″ |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.270″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .301″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.090″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.074″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | F-632-2 |
| Thread Size | 6-32 |
| Hole size in sheet (+0.003/-.0.000) | .091″ |
| Minimum sheet thickness | 0.090″ |
| Maximum sheet thickness | N/A |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.270″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .316″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.090″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.104″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | S-M3-0 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .168″ |
| Minimum sheet thickness | .031″ |
| Maximum sheet thickness | N/A |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .336″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Thickness (T) above material after install | .059″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SP-M3-0 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | 0.166″ |
| Minimum sheet thickness | 0.031″ |
| Maximum sheet thickness | N/A |
| Fastener material | A236 Hardened Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.313″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | 0.501″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated and/or tested |
| Thickness (T) above material after install | .059″ |
| 304 Stainless Steel material ranges | 0.048″-0.375″ |
| 316 Stainless Steel material ranges | 0.060″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061 Steel: Mild, G90
| SKU | F-M3-1 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet (+0.003/-.0.000) | 0.061″ |
| Minimum sheet thickness | 0.059″ |
| Maximum sheet thickness | 0.090″ |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.250″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .281″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.63″-0.090″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″ – 0.074″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | S-M4-0 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .212″ |
| Minimum sheet thickness | 0.031″ |
| Maximum sheet thickness | N/A |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .272″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .379″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Thickness (T) above material after install | .079″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SP-M4-0 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .213″ |
| Minimum sheet thickness | 0.031″ |
| Maximum sheet thickness | N/A |
| Fastener material | A236 Hardened Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .313″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .584″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated and/or tested |
| Thickness (T) above material after install | .079″ |
| 304 Stainless Steel material ranges | 0.048″-0.500″ |
| 316 Stainless Steel material ranges | 0.060″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061 Steel: Mild, G90
| SKU | F-M4-1 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet (+0.003/-.0.000) | 0.061″ |
| Minimum sheet thickness | 0.059″ |
| Maximum sheet thickness | 0.090″ |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.283″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .314″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.63″-0.090″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″ – 0.074″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | F-M4-2 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet (+0.003/-.0.000) | .091″ |
| Minimum sheet thickness | 0.090″ |
| Maximum sheet thickness | N/A |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.283″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .329″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.090″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.104″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | S-832-1 |
| Thread Size | 8-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .213″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | N/A |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .270″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .378″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Thickness (T) above material after install | .090″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SP-832-1 |
| Thread Size | 8-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .213″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | N/A |
| Fastener material | A236 Hardened Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .313″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .583″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated and/or tested |
| Thickness (T) above material after install | .090″ |
| 304 Stainless Steel material ranges | 0.048″-0.500″ |
| 316 Stainless Steel material ranges | 0.060″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061 Steel: Mild, G90
| SKU | F-832-1 |
| Thread Size | 8-32 |
| Hole size in sheet (+0.003/-.0.000) | .061″ |
| Minimum sheet thickness | 0.059″ |
| Maximum sheet thickness | 0.090″ |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.280″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .311″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.090″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.074″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | F-832-2 |
| Thread Size | 8-32 |
| Hole size in sheet (+0.003/-.0.000) | .091″ |
| Minimum sheet thickness | 0.090″ |
| Maximum sheet thickness | N/A |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.280″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .326″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.090″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.104″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SS-M5-0 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet +0.003″/-0.000″ (H) | .251″ |
| Minimum sheet thickness | 0.031″ |
| Maximum sheet thickness | N/A |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .280″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .407″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Thickness (T) above material after install | .079″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SP-M5-0 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet +0.003″/-0.000″ (H) | .250″ |
| Minimum sheet thickness | 0.031″ |
| Maximum sheet thickness | N/A |
| Fastener material | A236 Hardened Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .313″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .592″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated and/or tested |
| Thickness (T) above material after install | .079″ |
| 304 Stainless Steel material ranges | 0.048″-0.375″ |
| 316 Stainless Steel material ranges | 0.060″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061 Steel: Mild, G90
| SKU | F-M5-1 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet (+0.003/-.0.000) | 0.061″ |
| Minimum sheet thickness | 0.059″ |
| Maximum sheet thickness | 0.090″ |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.315″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .346″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.63″-0.090″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″ – 0.074″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | F-M5-2 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet (+0.003/-.0.000) | .091″ |
| Minimum sheet thickness | 0.090″ |
| Maximum sheet thickness | N/A |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.315″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .361″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.090″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.104″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SS-032-1 |
| Thread Size | 10-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .250″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | N/A |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .280″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .407″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Thickness (T) above material after install | .090″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SP-032-1 |
| Thread Size | 10-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .250″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | N/A |
| Fastener material | A236 Hardened Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .313″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .593″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated and/or tested |
| Thickness (T) above material after install | .090″ |
| 304 Stainless Steel material ranges | 0.048″-0.500″ |
| 316 Stainless Steel material ranges | 0.060″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061 Steel: Mild, G90
| SKU | F-032-1 |
| Thread Size | 10-32 |
| Hole size in sheet (+0.003/-.0.000) | .061″ |
| Minimum sheet thickness | 0.059″ |
| Maximum sheet thickness | 0.090″ |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.310″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .341″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.090″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.074″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | F-032-2 |
| Thread Size | 10-32 |
| Hole size in sheet (+0.003/-.0.000) | .091″ |
| Minimum sheet thickness | 0.090″ |
| Maximum sheet thickness | N/A |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.310″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .356″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.090″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.104″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | S-M6-0 |
| Thread Size | M6 x 1.0 |
| Hole size in sheet +0.003″/-0.000″ (H) | .345″ |
| Minimum sheet thickness | 0.048″ |
| Maximum sheet thickness | N/A |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .339″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .513″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Thickness (T) above material after install | .161″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SP-M6-1 |
| Thread Size | M6 x 1.0 |
| Hole size in sheet +0.003″/-0.000″ (H) | .344″ |
| Minimum sheet thickness | 0.055″ |
| Maximum sheet thickness | N/A |
| Fastener material | A236 Hardened Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .375″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .714″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated and/or tested |
| Thickness (T) above material after install | .161″ |
| 304 Stainless Steel material ranges | 0.048″-0.500″ |
| 316 Stainless Steel material ranges | 0.060″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | F-M6-3 |
| Thread Size | M6 x 1 |
| Hole size in sheet (+0.003/-.0.000) | 0.121″ |
| Minimum sheet thickness | 0.119″ |
| Maximum sheet thickness | 0.156″ |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.330″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .391″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.119″-0.135″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | F-M6-4 |
| Thread Size | M6 x 1 |
| Hole size in sheet (+0.003/-.0.000) | 0.152″ |
| Minimum sheet thickness | 0.151″ |
| Maximum sheet thickness | 0.187″ |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.330″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .406″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.187″ – 0.190″ |
| Steel material ranges (CRS, HRPO, HR) | 0.188″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | F-M6-5 |
| Thread Size | M6 x 1 |
| Hole size in sheet (+0.003/-.0.000) | 0.183″ |
| Minimum sheet thickness | 0.119″ |
| Maximum sheet thickness | N/A |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.330″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .422″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.125″ – 0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.119″ – 0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | S-0420-1 |
| Thread Size | 1/4-20 |
| Hole size in sheet +0.003″/-0.000″ (H) | .344″ |
| Minimum sheet thickness | 0.056″ |
| Maximum sheet thickness | N/A |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .340″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .514″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Thickness (T) above material after install | .161″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SP-0420-1 |
| Thread Size | 1/4-20 |
| Hole size in sheet +0.003″/-0.000″ (H) | .344″ |
| Minimum sheet thickness | 0.056″ |
| Maximum sheet thickness | N/A |
| Fastener material | A236 Hardened Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .375″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .715″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated and/or tested |
| Thickness (T) above material after install | .170″ |
| 304 Stainless Steel material ranges | 0.060″-0.500″ |
| 316 Stainless Steel material ranges | 0.060″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061 Steel: Mild
| SKU | F-0420-3 |
| Thread Size | 1/4-20 |
| Hole size in sheet (+0.003/-.0.000) | 0.121″ |
| Minimum sheet thickness | 0.119″ |
| Maximum sheet thickness | 0.156″ |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.340″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .401″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.119″-0.135″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 6061, 7075 Steel: Mild
| SKU | F-0420-4 |
| Thread Size | 1/4-20 |
| Hole size in sheet (+0.003/-.0.000) | 0.152″ |
| Minimum sheet thickness | 0.151″ |
| Maximum sheet thickness | 0.187″ |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.340″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .416″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.187″-0.190″ |
| Steel material ranges (CRS, HRPO, HR) | 0.188″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 6061, 7075 Steel: Mild
| SKU | F-0420-5 |
| Thread Size | 1/4-20 |
| Hole size in sheet (+0.003/-.0.000) | 0.183″ |
| Minimum sheet thickness | 0.119″ |
| Maximum sheet thickness | N/A” |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.340″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .432″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.125″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.119″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | S-0518-1 |
| Thread Size | 5/16-18 |
| Hole size in sheet +0.003″/-0.000″ (H) | .413″ |
| Minimum sheet thickness | 0.056″ |
| Maximum sheet thickness | N/A |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .380″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .587″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Thickness (T) above material after install | .230″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SP-0518-1 |
| Thread Size | 5/16-18 |
| Hole size in sheet +0.003″/-0.000″ (H) | .413″ |
| Minimum sheet thickness | 0.056″ |
| Maximum sheet thickness | N/A |
| Fastener material | A236 Hardened Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .380″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .755″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated and/or tested |
| Thickness (T) above material after install | .230″ |
| 304 Stainless Steel material ranges | 0.048″-0.500″ |
| 316 Stainless Steel material ranges | 0.060″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | S-M8-1 |
| Thread Size | M8 x 1.25 |
| Hole size in sheet +0.003″/-0.000″ (H) | .413″ |
| Minimum sheet thickness | 0.055″ |
| Maximum sheet thickness | N/A |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .382″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | . 589“ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Thickness (T) above material after install | .161″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SP-M8-1 |
| Thread Size | M8 x 1.25 |
| Hole size in sheet +0.003″/-0.000″ (H) | .413″ |
| Minimum sheet thickness | 0.055″ |
| Maximum sheet thickness | N/A |
| Fastener material | A236 Hardened Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .382″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .757″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated and/or tested |
| Thickness (T) above material after install | .215″ |
| 304 Stainless Steel material ranges | 0.060″-0.500″ |
| 316 Stainless Steel material ranges | 0.060″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | S-0616-1 |
| Thread Size | 3/8-16 |
| Hole size in sheet +0.003″/-0.000″ (H) | .500″ |
| Minimum sheet thickness | 0.090″ |
| Maximum sheet thickness | N/A |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .440″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .690″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Thickness (T) above material after install | .270″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.090″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.104″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SP-0616-1 |
| Thread Size | 3/8-16 |
| Hole size in sheet +0.003″/-0.000″ (H) | .500″ |
| Minimum sheet thickness | 0.09″ |
| Maximum sheet thickness | N/A |
| Fastener material | A236 Hardened Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .440″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .815″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated and/or tested |
| Thickness (T) above material after install | .270″ |
| 304 Stainless Steel material ranges | 0.0100″-0.500″ |
| 316 Stainless Steel material ranges | 0.125″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-440-8 |
| Thread Size | 4-40 x .250″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .168″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .125″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .336″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .250″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.119″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-440-8 |
| Thread Size | 440 |
| Hole size in sheet +0.003″/-0.000″ (H) | .166″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .125″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .334″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .250″ |
| 304 Stainless Steel material ranges | 0.048″-0.125″ |
| 316 Stainless Steel material ranges | 0.060″-0.125″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-440-12 |
| Thread Size | 4-40 x .375″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .168″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .250″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .336″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .375″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-440-12 |
| Thread Size | 440 |
| Hole size in sheet +0.003″/-0.000″ (H) | .166″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .250″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .334″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .375″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-440-16 |
| Thread Size | 4-40 x .500″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .168″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .375″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .336″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .500″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-632-8 |
| Thread Size | 6-32 x .250″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .215″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .125″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .270″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .379″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .250″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.119″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-632-8 |
| Thread Size | 6-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .213″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .125″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .280″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .387″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .250″ |
| 304 Stainless Steel material ranges | 0.048″-0.125″ |
| 316 Stainless Steel material ranges | 0.060″-0.125″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-632-12 |
| Thread Size | 6-32 x .375″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .215″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .250″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .270″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .379″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .375″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-632-12 |
| Thread Size | 6-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .213″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .250″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .280″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .387″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .375″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-632-16 |
| Thread Size | 6-32 x .500″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .215″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .375″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .270″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .379″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .500″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.375″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-632-20 |
| Thread Size | 6-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .213″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .500″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .280″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .387″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .625″ |
| 304 Stainless Steel material ranges | 0.048″-0.500″ |
| 316 Stainless Steel material ranges | 0.060″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-M3-6 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .166″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .111″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .336″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .236″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.100″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.104″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-M3-6 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .166″ |
| Minimum sheet thickness | 0.39″ |
| Maximum sheet thickness | .111″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .334″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .236″ |
| 304 Stainless Steel material ranges | 0.048″-0.100″ |
| 316 Stainless Steel material ranges | 0.060″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-M3-10 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .166″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .269″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge or bend | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .336″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .394″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-M3-10 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .166″ |
| Minimum sheet thickness | 0.39″ |
| Maximum sheet thickness | .269″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .334″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .394″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-M3-12 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .166″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .347″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .336″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .472″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-M3-12 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .166″ |
| Minimum sheet thickness | 0.39″ |
| Maximum sheet thickness | .111″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .334″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .472″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-M4-6 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | .050″ |
| Maximum sheet thickness | .111″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (L) | .315″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .456″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .236″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.100″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.104″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-M4-6 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | 0.50″ |
| Maximum sheet thickness | .111″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .331″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .472″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .236″ |
| 304 Stainless Steel material ranges | 0.048″-0.100″ |
| 316 Stainless Steel material ranges | 0.060″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-M4-10 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | .050″ |
| Maximum sheet thickness | .269″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .315″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .456″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .394″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-M4-10 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | 0.50″ |
| Maximum sheet thickness | .269″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .331″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .472″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .394″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-M4-12 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | .050″ |
| Maximum sheet thickness | .347″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .315″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .456″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .472″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-M4-12 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | 0.50″ |
| Maximum sheet thickness | .347″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (L) | .331″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .472″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .472″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-832-8 |
| Thread Size | 8-32 x .250″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | .050″ |
| Maximum sheet thickness | .125″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .310″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .452″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .250″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.119″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-832-12 |
| Thread Size | 8-32 x .375″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | .050″ |
| Maximum sheet thickness | .250″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .310″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .452″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .375″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-832-12 |
| Thread Size | 8-32 x .375″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .250″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .330″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .471″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .375″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-832-16 |
| Thread Size | 8-32 x .500″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | .050″ |
| Maximum sheet thickness | .375″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .310″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .452″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .500″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.375″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-M5-6 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | .050″ |
| Maximum sheet thickness | .111″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .315″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .456″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .236″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.100″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.104″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-M5-6 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | 0.50″ |
| Maximum sheet thickness | .111″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .331″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .472″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .236″ |
| 304 Stainless Steel material ranges | 0.048″-0.100″ |
| 316 Stainless Steel material ranges | 0.060″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-M5-10 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | .050″ |
| Maximum sheet thickness | .269″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .315″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .456″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .394″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-M5-10 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | 0.50″ |
| Maximum sheet thickness | .269″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .331″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .472″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .394″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-M5-12 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | .050″ |
| Maximum sheet thickness | .347″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .315″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .456″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .472″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-032-8 |
| Thread Size | 10-32 x .250″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | .050″ |
| Maximum sheet thickness | .125″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .310″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .452″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .250″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.119″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-032-8 |
| Thread Size | 10-32 x .250″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | 0.05″ |
| Maximum sheet thickness | .125″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .330″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .471″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .250″ |
| 304 Stainless Steel material ranges | 0.048″-0.125″ |
| 316 Stainless Steel material ranges | 0.060″-0.125″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-032-12 |
| Thread Size | 10-32 x .375″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | .050″ |
| Maximum sheet thickness | .250″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .310″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .452″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .375″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-032-12 |
| Thread Size | 10-32 x .375″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | 0.05″ |
| Maximum sheet thickness | .250″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .330″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .471″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .375″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SO-032-16 |
| Thread Size | 10-32 x .500″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | .050″ |
| Maximum sheet thickness | .375″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .310″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .452″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .500″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.375″ |
| Steel material ranges (CRS, HRPO, HR) | 0.059″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | SO4-032-16 |
| Thread Size | 10-32 x .500″ |
| Hole size in sheet +0.003″/-0.000″ (H) | .281″ |
| Minimum sheet thickness | .050″ |
| Maximum sheet thickness | .375″ |
| Fastener material | SST 400 |
| Minimum distance hole C/L to edge (K) or bend (N) | .330″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .471″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Passivated |
| Length | .500″ |
| 304 Stainless Steel material ranges | 0.060″-0.375″ |
| 316 Stainless Steel material ranges | 0.060″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-440-4 |
| Thread Size | 440 |
| Hole size in sheet +0.003″/-0.000″ (H) | .113″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .125″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .308″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .250″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.119″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-440-4 |
| Thread Size | 440 |
| Hole size in sheet +0.003″/-0.000″ (H) | .111″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .125″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .306″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .250″ |
| 304 Stainless Steel material ranges | 0.048″-0.100″ |
| 316 Stainless Steel material ranges | 0.060″-0.125″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-440-6 |
| Thread Size | 4-40 |
| Hole size in sheet +0.003″/-0.000″ (H) | .113″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .250″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .308″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .375″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-440-6 |
| Thread Size | 440 |
| Hole size in sheet +0.003″/-0.000″ (H) | .111″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .250″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .306″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .375″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-440-8 |
| Thread Size | 4-40 |
| Hole size in sheet +0.003″/-0.000″ (H) | .113″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .375″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .308″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .500″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-440-8 |
| Thread Size | 440 |
| Hole size in sheet +0.003″/-0.000″ (H) | .111″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .375″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .306″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .500″ |
| 304 Stainless Steel material ranges | 0.048″-0.375″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-440-10 |
| Thread Size | 4-40 |
| Hole size in sheet +0.003″/-0.000″ (H) | .113″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .500″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .308″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .625″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-440-10 |
| Thread Size | 440 |
| Hole size in sheet +0.003″/-0.000″ (H) | .111″ |
| Minimum sheet thickness | .040″ |
| Maximum sheet thickness | .500″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .306″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .625″ |
| 304 Stainless Steel material ranges | 0.048″-0.500″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-632-4 |
| Thread Size | 6-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .139″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .125″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .321″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .250″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.119″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-632-4 |
| Thread Size | 6-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .137″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .125″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .319″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .250″ |
| 304 Stainless Steel material ranges | 0.048″-0.125″ |
| 316 Stainless Steel material ranges | 0.060″-0.125″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-632-6 |
| Thread Size | 6-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .139″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .250″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .321″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .375″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-632-6 |
| Thread Size | 6-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .137″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .250″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .319″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .375″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-632-8 |
| Thread Size | 6-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .139″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .375″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .321″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .500″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.375″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-632-8 |
| Thread Size | 6-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .137″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .375″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .319″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .500″ |
| 304 Stainless Steel material ranges | 0.048″-0.375″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-632-10 |
| Thread Size | 6-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .139″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .500″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .321″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .625″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.375″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-632-10 |
| Thread Size | 6-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .137″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .500″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .319″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .625″ |
| 304 Stainless Steel material ranges | 0.048″-0.500″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-M3-6 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .121″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .111″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .312″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .236″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.100″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.104″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-M3-6 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .118″ |
| Minimum sheet thickness | 0.039″ |
| Maximum sheet thickness | .111″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .310″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .236″ |
| 304 Stainless Steel material ranges | 0.048″-0.100″ |
| 316 Stainless Steel material ranges | 0.060″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-M3-8 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .121″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .190″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .312″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .315″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.187″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.187″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-M3-8 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .118″ |
| Minimum sheet thickness | 0.039″ |
| Maximum sheet thickness | .190″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .310″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .315″ |
| 304 Stainless Steel material ranges | 0.048″-0.187″ |
| 316 Stainless Steel material ranges | 0.060″-0.187″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-M3-10 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .121″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .268″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .312″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .393″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-M3-10 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .118″ |
| Minimum sheet thickness | 0.039″ |
| Maximum sheet thickness | .269″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .310″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .393″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-M3-12 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .121″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .347″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .312″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .472″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-M3-12 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet +0.003″/-0.000″ (H) | .118″ |
| Minimum sheet thickness | 0.39″ |
| Maximum sheet thickness | .347″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .250″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .310″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .472″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-M4-6 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .159″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .111″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .364″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .236″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.100″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.104″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-M4-6 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .157″ |
| Minimum sheet thickness | 0.039″ |
| Maximum sheet thickness | .111″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .362″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .236″ |
| 304 Stainless Steel material ranges | 0.048″-0.100″ |
| 316 Stainless Steel material ranges | 0.060″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-M4-8 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .159″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .190″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .364″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .315″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.187″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.187″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-M4-8 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .157″ |
| Minimum sheet thickness | 0.039″ |
| Maximum sheet thickness | .190″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .362″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .315″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-M4-10 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .159″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .268″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .364″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .393″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-M4-10 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .157″ |
| Minimum sheet thickness | 0.039″ |
| Maximum sheet thickness | .269″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .362″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .393″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-M4-12 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .159″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .347″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .364″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .472″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-M4-12 |
| Thread Size | M4 x 0.7 |
| Hole size in sheet +0.003″/-0.000″ (H) | .157″ |
| Minimum sheet thickness | 0.39″ |
| Maximum sheet thickness | .347″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .362″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .472″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-832-4 |
| Thread Size | 8-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .165″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .125″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .365″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .250″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.119″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-832-4 |
| Thread Size | 8-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .163″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .125″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .363″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .250″ |
| 304 Stainless Steel material ranges | 0.048″-0.125″ |
| 316 Stainless Steel material ranges | 0.060″-0.125″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-832-6 |
| Thread Size | 8-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .165″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .250″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .365″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .375″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-832-6 |
| Thread Size | 8-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .163″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .250″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .363″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .375″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-832-8 |
| Thread Size | 8-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .165″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .375″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .365″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .500″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.375″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-832-8 |
| Thread Size | 8-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .163″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .375″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .363″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .500″ |
| 304 Stainless Steel material ranges | 0.048″-0.375″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-832-10 |
| Thread Size | 8-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .165″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .500″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .365″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .625″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.375″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-832-10 |
| Thread Size | 8-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .163″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .500″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .363″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .625″ |
| 304 Stainless Steel material ranges | 0.048″-0.500″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-M5-8 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet +0.003″/-0.000″ (H) | .198″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .190″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .384″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .315″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.187″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.187″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-M5-8 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet +0.003″/-0.000″ (H) | .197″ |
| Minimum sheet thickness | 0.039″ |
| Maximum sheet thickness | .190″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .382″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .315″ |
| 304 Stainless Steel material ranges | 0.048″-0.187″ |
| 316 Stainless Steel material ranges | 0.060″-0.187″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-M5-10 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet +0.003″/-0.000″ (H) | .198″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .268″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .384″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .393″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-M5-10 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet +0.003″/-0.000″ (H) | .197″ |
| Minimum sheet thickness | 0.39″ |
| Maximum sheet thickness | .269″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .382″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .394″ |
| 304 Stainless Steel material ranges | 0.048″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-M5-12 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet +0.003″/-0.000″ (H) | .198″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .347″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .384″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .472″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH-M5-12 |
| Thread Size | M5 x 0.8 |
| Hole size in sheet +0.003″/-0.000″ (H) | .197″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .347″ |
| Fastener material | 400 SST |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .382″ |
| Recommended panel material | Stainless Steel |
| Coating type | Zinc |
| Length | .472″ |
| 304 Stainless Steel material ranges | 0.040″-0.250″ |
| 316 Stainless Steel material ranges | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-032-6 |
| Thread Size | 10-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .191″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .250″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .378″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .375″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-032-6 |
| Thread Size | 10-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .189″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .125″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .376″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .375″ |
| 304 Stainless Steel material ranges | 0.048″-0.125″ |
| 316 Stainless Steel material ranges | 0.060″-0.125″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-032-8 |
| Thread Size | 10-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .191″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .375″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .378″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .500″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.375″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH-032-8 |
| Thread Size | 10-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .189″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .375″ |
| Fastener material | 400 SST |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .376″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .500″ |
| 304 Stainless Steel material ranges | 0.040″-0.375″ |
| 316 Stainless Steel material ranges | 0.048″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-032-10 |
| Thread Size | 10-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .191″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .500″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .378″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .625″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH-032-8 |
| Thread Size | 10-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .189″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .375″ |
| Fastener material | 400 SST |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .376″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .500″ |
| 304 Stainless Steel material ranges | 0.040″-0.500″ |
| 316 Stainless Steel material ranges | 0.048″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-032-12 |
| Thread Size | 10-32 |
| Hole size in sheet +0.003″/-0.000″ (H) | .189″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .625″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .281″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .376″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .750″ |
| 304 Stainless Steel material ranges | 0.048″-0.500″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-M6-12 |
| Thread Size | M6 x 1 |
| Hole size in sheet +0.003″/-0.000″ (H) | .236″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .347″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .283″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .403″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .472″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-M6-20 |
| Thread Size | M6 x 1 |
| Hole size in sheet +0.003″/-0.000″ (H) | .236″ |
| Minimum sheet thickness | 0.063″ |
| Maximum sheet thickness | .662″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .311″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .431″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .787″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.063″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.074″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-M6-20 |
| Thread Size | M6 x 1 |
| Hole size in sheet +0.003″/-0.000″ (H) | .236″ |
| Minimum sheet thickness | 0.063″ |
| Maximum sheet thickness | .662″ |
| Fastener material | 400 SST |
| Minimum distance hole C/L to edge (K) or bend (N) | .375″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .494″ |
| Recommended panel material | Stainless Steel |
| Coating type | Zinc |
| Length | .787″ |
| 304 Stainless Steel material ranges | 0.074″-0.500″ |
| 316 Stainless Steel material ranges | 0.125″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-0420-6 |
| Thread Size | 1/4-20 |
| Hole size in sheet +0.003″/-0.000″ (H) | .251″ |
| Minimum sheet thickness | 0.062″ |
| Maximum sheet thickness | .250″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .312″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .439″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .375″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-0420-8 |
| Thread Size | 1/4-20 |
| Hole size in sheet +0.003″/-0.000″ (H) | .251″ |
| Minimum sheet thickness | 0.062″ |
| Maximum sheet thickness | .375″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .312″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .439″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .500″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.060″-0.375″ |
| Steel material ranges (CRS, HRPO, HR) | 0.060″-0.375″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-0420-8 |
| Thread Size | 1/4-20 |
| Hole size in sheet +0.003″/-0.000″ (H) | .249″ |
| Minimum sheet thickness | 0.62″ |
| Maximum sheet thickness | .375″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .375″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .500″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .500″ |
| 304 Stainless Steel material ranges | 0.060″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | FH-0420-12 |
| Thread Size | 1/4-20 |
| Hole size in sheet +0.003″/-0.000″ (H) | .251″ |
| Minimum sheet thickness | 0.062″ |
| Maximum sheet thickness | .625″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .312″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .439″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .750″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-0420-12 |
| Thread Size | 1/4-20 |
| Hole size in sheet +0.003″/-0.000″ (H) | .249″ |
| Minimum sheet thickness | 0.62″ |
| Maximum sheet thickness | .625″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .375″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .500″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .750″ |
| 304 Stainless Steel material ranges | 0.060″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Stainless Steel: 304, 316
| SKU | FH4-0420-16 |
| Thread Size | 1/4-20 |
| Hole size in sheet (+0.003/-.0.000) | .249″ |
| Minimum sheet thickness | 0.062″ |
| Maximum sheet thickness | .875″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .375″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .437″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | 1.000″ |
| 304 Stainless Steel material ranges | 0.060″-0.250″ |
| 316 Stainless Steel material ranges | 0.060″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | FH-M8-12 |
| Thread Size | M8 x 1.25 |
| Hole size in sheet +0.003″/-0.000″ (H) | .315″ |
| Minimum sheet thickness | 0.094″ |
| Maximum sheet thickness | .347″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .378″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .536″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .472″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.100″-0.250″ |
| Steel material ranges (CRS, HRPO, HR) | 0.104″-0.250″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | FH-M8-25 |
| Thread Size | M8 x 1.25 |
| Hole size in sheet +0.003″/-0.000″ (H) | .315″ |
| Minimum sheet thickness | 0.094″ |
| Maximum sheet thickness | .859″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | .378″ |
| Minimum C/L to C/L distance between two of the same hardware SKU (M) | .536″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .984″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.100″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.104″-0.500″ |
We proudly use hardware by PEM. To confirm specifications not listed here, search for the SKU in PEM’s hardware catalog.
H = Hole size in sheet (+0.003”/-0.000”)
J = Bend allowance (find with Bend Calculator)
K = Minimum distance from center of hole to cut edge
N = Minimum distance from center of hole to edge of bend allowance area (J)
M = Minimum distance from hole center to hole center for two of the same hardware SKU
P = Minimum distance from hole center to hole center for two different hardware SKUs, see our Hardware Guidelines
Aluminum: 5052, 6061, 7075 Steel: Mild
| SKU | F-M3-2 |
| Thread Size | M3 x 0.5 |
| Hole size in sheet (+0.003/-.0.000) | .091″ |
| Minimum sheet thickness | 0.090″ |
| Maximum sheet thickness | N/A |
| Fastener material | 300 Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.250″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .296″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | 300 Series Stainless Steel Passivated |
| Thickness (T) above material after install | 0.0″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.090″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.104″-0.500″ |
We proudly use hardware by PEM
| SKU | SO4-632-20 |
| Thread Size | 6-32 |
| Hole size in sheet (+0.003/-.0.000) | .213″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | .500″ |
| Fastener material | 400 Stainless Steel |
| Minimum distance hole C/L to edge | 0.280″ |
| When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. Example shown with x2 of the same hardware. | .420″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated |
| Length | .625″ |
| 304 Stainless Steel material ranges | 0.048″-0.375″ |
| 316 Stainless Steel material ranges | 0.060″-0.375″ |
