If you’re looking for high quality cuts in difficult materials such as Carbon Fiber, G10 and Linen Phenolic (Micarta), try our waterjet cutting services.
Historically, waterjet cutting parts has been a slow and expensive process. Our automated waterjet process allows us to provide fast, efficient and affordable waterjet services for businesses and individuals.
If you’re looking for high quality cuts in difficult materials such as Carbon Fiber, G10 and Linen Phenolic (Micarta), try our waterjet cutting services.
Waterjet is capable of highly intricate cuts with tolerances of +-.009” (.25mm) or better in composite materials.
Expect tolerances of +-.009” (.25mm) or better in composite materials.
The combination of water speed, pressure, nozzle size and abrasive flow rate allow waterjet cutting to produce a superior edge quality compared to laser cutting.
When your parts are waterjet cut there’s virtually no HAZ (heat-affected zone).
The combination of water speed, pressure, nozzle size and abrasive flow rate allow waterjet cutting to produce a superior edge quality compared to laser cutting.
The crushed garnet in the waterjet stream acts like a belt sander, slowly abrading away the material, leaving a very smooth edge. Dross and burr commonly found in other cutting methods is effectively eliminated.
When your parts are waterjet cut there’s virtually no HAZ (heat-affected zone).
The crushed garnet in the waterjet stream acts like a belt sander, slowly abrading away the material, leaving a very smooth edge.
With our team of highly trained machinists and our state-of-the-art manufacturing technology, we’ve made it easier than ever to design and order waterjet cut parts. Upload your design to our app, select your material, add any additional services, and get an instant quote!
Making sure your file meets all our requirements will ensure you get your parts as quickly as possible.
Select your material, apply additional services, and adjust your quantity to see live pricing updates.
from
$29
+ free shipping!
minimum order
“As a mechanical engineer, I am always stunned by the impressive lead time and quality of all SendCutSend parts I have received. The interface of the website is easy to use and I am always happy to support US manufacturing.”
Before uploading your files, take a moment to read our waterjet guidelines. In these guidelines we go through setup and cost, file formats, sizing and more.
Yes, we are laser-fast, but we’re also secure, and offer 100% money-back guarantee on all our parts. You’re in good hands with us.
Our educated and friendly team is here to answer your questions and assist you in getting the best parts possible.
We make everything at our facilities in Reno, Nevada and Paris, Kentucky. From cutting, bending, and finishing to software engineering and customer support, your parts are truly made in the USA.
All our services come guaranteed. If you’re not 100% happy with your parts, we’ll give you a refund or remake on the spot.
We know your designs are valuable. Your files are 100% secure in our system.
From prototype to full assembly, we have you covered every step of the way. We have over 15 finishing options, an extensive hardware catalog, and more!
We offer custom laser cutting, waterjet cutting, and CNC routing. We’ll cut your parts with the method best suited for your material.
Add dimension to your projects with our precision CNC bending services.
Quickly and easily add threading to your parts, or allow hardware to sit flush.
Select from our catalog of PEM press-fit hardware to add nuts, studs, and standoffs.
We offer Class II anodizing services to add durability and character to your laser cut parts.
Increase rust prevention, wear resistance, and strength with zinc and nickel plating.
Give your laser cut parts a bold, long-lasting finish and protective layer in one of 7 colors
This FREE process removes small imperfections, scratches, and burr left over from the cutting process.
Deburring is included FREE on orders with eligible materials!
We proudly use hardware by PEM
Aluminum: 5052, 6061, 7075 Steel: Mild
SKU | FH-M8-12 |
Thread Size | M8 x 1.25 |
Hole size in sheet (+0.003/-.0.000) | .315″ |
Minimum sheet thickness | 0.94″ |
Maximum sheet thickness | .347″ |
Fastener material | Steel |
Minimum distance hole C/L to edge | 0.378″ |
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. | .567″ |
Recommended panel material | Steel/Aluminum |
Coating type | Zinc |
Length | .472″ |
Aluminum material ranges (5052, 6061, 7075) | 0.100″-0.250″ |
Steel material ranges (CRS, HRPO, HR) | 0.104″-0.250″ |
We proudly use hardware by PEM
Aluminum: 5052, 6061, 7075 Steel: Mild, G30
SKU | SO-440-8 |
Thread Size | 4-40 x .250″ |
Hole size in sheet (+0.003/-.0.000) | .168″ |
Minimum sheet thickness | 0.040″ |
Maximum sheet thickness | .125″ |
Fastener material | Steel |
Minimum distance hole C/L to edge | 0.230″ |
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. | .345″ |
Recommended panel material | Steel/Aluminum |
Coating type | Zinc |
Length | .250″ |
Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.125″ |
Steel material ranges (CRS, HRPO, HR) | 0.048″-0.119″ |
We proudly use hardware by PEM
Stainless Steel: 304, 316
SKU | SO4-440-8 |
Thread Size | 440 |
Hole size in sheet (+0.003/-.0.000) | .166″ |
Minimum sheet thickness | 0.04″ |
Maximum sheet thickness | .125″ |
Fastener material | 400 Stainless Steel |
Minimum distance hole C/L to edge | 0.230″ |
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. Example shown with x2 of the same hardware. | .345″ |
Recommended panel material | Stainless Steel |
Coating type | Passivated |
Length | .250″ |
304 Stainless Steel material ranges | 0.048″-0.125″ |
316 Stainless Steel material ranges | 0.060″-0.125″ |