At this time SendCutSend does not offer beveling services or 3D cutting. This includes cutting/grinding a taper into knife blades. We only offer 2D perpendicular cuts and cannot produce any kind of beveled or radiused edge options. Learn about the variety of services we offer on our laser cut services pages. Before uploading your file, be sure to check out our guideline pages to make sure your file is laser ready.
Everything you need to know to design for laser-cutting, CNC routing, bending, and tapping.
Everything from software-specific tutorials to material selection tips.
We have sheet metals, plastics, composites, and wood/boards for every project.
Min and Max part sizes for all our materials
No CAD File? No Problem! Send your sketch or template to our Design Services team.
We proudly use hardware by PEM
| SKU | SO-440-8 |
| Thread Size | 4-40 x .250″ |
| Hole size in sheet (+0.003/-.0.000) | .168″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .125″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge | 0.230″ |
| When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. | .314″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .250″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.119″ |
