Proudly made in the USA
icon-flag
GET STARTED
LOGIN

Online Tumbling services

10 Materials

.119"- .500" Thick

+1-2 days

Production Time

Get instant pricing
benefits
Materials
guidelines
what to expect

Tumbling sizing and options

Part Sizes
A.
.5" x 1.5"
Min part size
B.
4" x 7"
Max part size
10 MATERIALS, .119”-.500”
5052 H32 Aluminum6061 T6 Aluminum7075 T6 AluminumBrass4130 ChromolyCopperMild Steel304 Stainless Steel316 Stainless SteelGrade 5 Titanium
Compatible Services
Laser CuttingBendingCountersinkingHardware InsertionTapping

Fast turnarounds to keep your projects moving

Clean up sharp edges and give your parts a consistent finish. Tumbling makes parts safer to handle and ready for the next step.
powder-scroller
blue-powder-bends
pc-muulti-stack2
gray-pow-gaskets
dimple-wrinkle-pow-1

Remove burr and sharp edges

Tumbling ensures uniform removal and smoothing of machined components

Cost-effective for mass finishing

Tumble multiple components in a single cycle.

In-house production

Tumbling adds just 1–2 days to standard production times.

“It was too easy and super fast from start to finish. My finished part came even BETTER than I expected it would.”

Jesse Gatdula

Available materials for Tumbling

Tumbling is available on a variety of materials at a minimum of 0.119″ thickness

One step to a finished part
Built to take abuse
Looks as good as it performs

5052 H32 Aluminum

6 thicknesses: .125" – .500"

6061 T6 Aluminum

7 thicknesses: .125" – .750"

7075 T6 Aluminum

3 thicknesses: .125" – .250"

Brass

3 thicknesses: .125" – .250"

4130 Chromoly

3 thicknesses: .125" – 250"

Copper

3 thicknesses: .125" – .250"

Mild Steel

7 thicknesses: .119" – .500"

304 Stainless Steel

5 thicknesses: .125" – .500"

316 Stainless Steel

3 thicknesses: .125" – .250"

Grade 5 Titanium

3 thicknesses: .125" – .250"

Upload now for instant pricing

Tumbling coating adds 1-2 days to production. For the fastest lead time, order tumbled parts separately.

Get Started

Affordable pricing. Up to 70% off in bulk.

6061 Aluminum .125"

3.5 x 2.5 in

Laser cutting, tumbling

Qty 1:

$16.06/ea

Qty 100:

$3.08/ea

4130 Chromoly .125"

3.75 x 4 in

Laser cutting, tumbling

Qty 1:

$29.82/ea

Qty 100:

$8.11/ea

Cold Rolled Carbon Steel

5 x 2 in

Laser cutting, bending, tumbling

Qty 1:

$30.13/ea

Qty 100:

$4.84/ea

Design guidelines for tumbled parts

Following a few basic design guidelines will help ensure your parts are tumbled properly and pass SendCutSend review.

Sizing & hole requirements

Sizing limits apply to flat parts before bending

Min part size (flat).5″ x 1.5″
Max part size (flat)4″ x 7″
Min material thickness.119″

What to expect with tumbled parts

  • Purpose: Tumbling is for deburring and edge softening only, not cosmetic finishing.
  • Edge softening: Cannot be precisely controlled. Expect rounded, uniform edges, not a specific radius.
  • Holes and cutouts: Features smaller than 0.5″ won’t be fully processed inside.
  • Surface finish: Will not be cosmetically perfect. Consistency between separate orders is not guaranteed.
  • Fragile geometry: Unsupported features will bend. Not recommended for thin or delicate parts.
  • Combined finishes: For tumbling plus anodizing, plating, or powder coating, submit a custom quote request.

Additional tumbling resources

If you’re designing parts for tumbling, these resources may help:

Pre-flight checklist

  • File is in a format that we accept (2D: .dxf, .dwg, .ai, .eps; 3D: .step or .stp)
  • All holes and cutouts are at least 50% material thickness for laser cut parts
  • All holes and cutouts are no less than 0.070” for most waterjet cut parts
  • All holes and cutouts are no less than 0.125” for all CNC routed parts
  • File is built at a 1:1 scale, preferably in inch or mm units
  • All objects are on the same layer
  • All stray points, duplicate lines, empty objects and text areas have been removed
  • No shapes have open contours
  • All shapes have been united, combined or merged
  • All text has been converted to outlines or paths
  • Cut-out text (reversed text) has bridges or has been stencilized

SendCutSend reviews

Customers love getting their sheet metal parts from us

View on Google

Top Quality Store

Please note: Pricing examples on our website are provided as general estimates and may not always reflect current prices. While we strive to keep these examples accurate, uploading your file is the best way to see instant current pricing.

Start your first SendCutSend project today!

Upload your CAD design, or try one of our customizable part templates to get instant pricing on your custom laser cut parts. All delivered to your door in a matter of days.

Upload a CAD file

We accept .ai, .dxf, .dwg, .eps, .stp, and .step

Use our Parts Builder

Customize one of our simple parts templates
GET STARTED