Do you offer payment terms like Net 30?

We offer Net 30 and Net 60 Terms for pre-qualified customers who prefer to pay with a PO. In order to apply for Terms with SendCutSend you need to fill out our Credit Application Form. Before filling out the form, make sure you fit the following requirements for NET terms: 

  • Your business must be a Partnership, LLC, or Corporation
  • You’ve been in business for at least two years
  • Predicted order volume is greater than $1,000 per month
  • Valid EIN
  • Two trade references and one bank reference
  • You’re an existing SendCutSend customer in good standing
  • You have publicly available information about your company (website, reviews, social media)

Learn more on our Payment Terms page.

In Summary

Does SendCutSend offer payment terms such as Net 30?

Yes, we offer Net 30 and Net 60 Terms for pre-qualified customers who prefer to pay with a PO. In order to apply for Terms with SendCutSend you need to fill out our Credit Application Form.

Start your first SendCutSend project today!

Upload your CAD design or use our parts builder and get instant pricing on your custom laser cut parts, all delivered to your door in a matter of days.

We proudly use hardware by PEM

Flush Standoff, 4-40, .250" Zinc plus Clear Chromate

Aluminum: 5052, 6061, 7075 Steel: Mild, G30

SKUSO-440-8
Thread Size4-40 x .250″
Hole size in sheet (+0.003/-.0.000).168″
Minimum sheet thickness0.040″
Maximum sheet thickness.125″
Fastener materialSteel
Minimum distance hole C/L to edge0.230″
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole..345″
Recommended panel materialSteel/Aluminum
Coating typeZinc
Length.250″
Aluminum material ranges (5052, 6061, 7075)0.040″-0.125″
Steel material ranges (CRS, HRPO, HR)0.048″-0.119″

We proudly use hardware by PEM

Flush Standoff, 4-40, .250" Passivated

Stainless Steel: 304, 316

SKUSO4-440-8
Thread Size440
Hole size in sheet (+0.003/-.0.000).166″
Minimum sheet thickness0.04″
Maximum sheet thickness.125″
Fastener material400 Stainless Steel
Minimum distance hole C/L to edge0.230″
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. Example shown with x2 of the same hardware..313″
Recommended panel materialStainless Steel
Coating typePassivated
Length.250″
304 Stainless Steel material ranges0.048″-0.125″
316 Stainless Steel material ranges0.060″-0.125″