It’s important that the file you upload for bending is a flat, 2D vector file. We have tutorials here you can follow to learn how to turn a bent part into a flat pattern in various CAD software.
Once you’ve uploaded your file, you can preview a 3D model of your part during the checkout process. At that point you can check to make sure the angles and flange orientations are correct, and make any adjustments to those within our checkout process without having to upload a new file.
This June, Spend $1,000 or more at checkout, you’ll receive 5% off instantly + a $200 gift card towards a future purchase.
"*" indicates required fields
We proudly use hardware by PEM
| SKU | SO-440-8 |
| Thread Size | 4-40 x .250″ |
| Hole size in sheet (+0.003/-.0.000) | .168″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .125″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge | 0.230″ |
| When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. | .314″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .250″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.119″ |
