Do you offer deburring?

Yes! Our deburring/finishing process is included at no cost. We use a variety of processes to remove small imperfections, scratches, and burr left over from the cutting process.

Deburring is available on parts larger than 3″ and tumbling for parts less than 4″

If your part qualifies for deburring, it will be automatically selected at checkout, you can unselect it if you prefer to not have your part deburred. Learn more about our no cost deburring services.

Start your first SendCutSend project today!

Upload your CAD design or use our parts builder and get a free instant quote on your custom laser cut parts, all delivered to your door in a matter of days.

We proudly use hardware by PEM

Flush Standoff, 4-40, .250" Zinc plus Clear Chromate

SKU SO-440-8
Thread Size 4-40 x .250″
Hole size in sheet (+0.003/-.0.000) .168″
Minimum sheet thickness 0.040″
Maximum sheet thickness .125″
Fastener material Steel
Minimum distance hole C/L to edge 0.230″
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. .345″
Recommended panel material Steel/Aluminum
Coating type Zinc
Length .250″
Aluminum material ranges (5052, 6061, 7075) 0.040″-0.125″
Steel material ranges (CRS, HRPO, HR) 0.048″-0.119″