Do you offer polishing and mirror finishes?

Does SendCutSend offer polishing or mirror finishes?

We do not offer any polished or mirror finish metals at this time. Mirror-finish acrylic is available, as well as a variety of plastics and composites with a gloss finish. Take a look at our powder coating colors which include glossy options.

If you need polishing on your parts, you will need to perform that process yourself after you receive them from us. If you are just looking to polish fingerprints or markings off your parts, we recommend Mothers Mag Polish for aluminum and brass, or Bar Keepers Friend for stainless steel.

Glossy acrylic has a polished effect — *Glossy powder coating*

Start your first SendCutSend project today!

Upload your CAD design or use our parts builder and get instant pricing on your custom laser cut parts, all delivered to your door in a matter of days.

SKU	SO-440-8
Thread Size	4-40 x .250″
Hole size in sheet (+0.003/-.0.000)	.168″
Minimum sheet thickness	0.040″
Maximum sheet thickness	.125″
Fastener material	Steel
Minimum distance hole C/L to edge or bend	.250″
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole.	.345″
Recommended panel material	Steel/Aluminum
Coating type	Zinc
Length	.250″
Aluminum material ranges (5052, 6061, 7075)	0.040″-0.125″
Steel material ranges (CRS, HRPO, HR)	0.048″-0.119″

SKU	SO4-440-8
Thread Size	440
Hole size in sheet (+0.003/-.0.000)	.166″
Minimum sheet thickness	0.04″
Maximum sheet thickness	.125″
Fastener material	400 Stainless Steel
Minimum distance hole C/L to edge or bend	.250″
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. Example shown with x2 of the same hardware.	.313″
Recommended panel material	Stainless Steel
Coating type	Passivated
Length	.250″
304 Stainless Steel material ranges	0.048″-0.125″
316 Stainless Steel material ranges	0.060″-0.125″

Do you offer polishing and mirror finishes?

Start your first SendCutSend project today!

Upload your CAD design or use our parts builder and get instant pricing on your custom laser cut parts, all delivered to your door in a matter of days.

We couldn’t do it without our customers

Flush Standoff, 4-40, .250" Zinc plus Clear Chromate

Flush Standoff, 4-40, .250" Passivated