How to export from Inkscape?

Create and export your design using Inkscape if you need a free design program that works well for decorative parts! Inkscape makes our list of recommended illustration software.

If you decide to try Inkscape, it is free to download here.

Be sure to export your design as an EPS format file: Exporting a Design as an EPS File in Inkscape Video & Guide

Check out information about our design requirements here: SendCutSend Design Guidelines

Once your file is exported as an EPS format file at 1:1 scaling, you should be able to upload it directly to our website for an instant quote. Confirm the overall dimensions and units are correct in the part preview. Use our file setup checklist to ensure your 2D file is cut-ready!

Start your first SendCutSend project today!

Upload your CAD design or use our parts builder and get a free instant quote on your custom laser cut parts, all delivered to your door in a matter of days.

We proudly use hardware by PEM

Flush Standoff, 4-40, .250" Zinc plus Clear Chromate

SKU SO-440-8
Thread Size 4-40 x .250″
Hole size in sheet (+0.003/-.0.000) .168″
Minimum sheet thickness 0.040″
Maximum sheet thickness .125″
Fastener material Steel
Minimum distance hole C/L to edge 0.230″
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. .345″
Recommended panel material Steel/Aluminum
Coating type Zinc
Length .250″
Aluminum material ranges (5052, 6061, 7075) 0.040″-0.125″
Steel material ranges (CRS, HRPO, HR) 0.048″-0.119″