Spend $1,000 get $200!

Spend $1,000 get $200!

Do you offer laser etching or laser engraving?

We do not offer laser engraving or solid etching at this time. We recommend contacting a specialty engraving service.

We can offer “single-line etching” on mild steel, aluminum, and stainless steel. Please see examples below. Single line etching can be useful to mark hole placement with crosshairs, bend lines, or simple part marking. The results vary greatly depending on which metal you select. This is NOT a cosmetic etch and we do not recommend it for any cosmetic or aesthetically critical application.

Mild Steel
Single Line Etch on Stainless
Stainless Steel
Cold Rolled Steel

If you need single line etching for your project, check out our guide on setting up your file for single line etching.

Start your first SendCutSend project today!

Upload your CAD design or use our parts builder and get a free instant quote on your custom laser cut parts, all delivered to your door in a matter of days.

☀️ Summer Savings ☀️

This June, Spend $1,000 or more at checkout, you’ll receive 5% off instantly + a $200 gift card towards a future purchase.

How do I get the code? Sign up below!

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

We proudly use hardware by PEM

Flush Standoff, 4-40, .250" Zinc plus Clear Chromate

Thread Size4-40 x .250″
Hole size in sheet (+0.003/-.0.000).168″
Minimum sheet thickness0.040″
Maximum sheet thickness.125″
Fastener materialSteel
Minimum distance hole C/L to edge0.230″
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole..314″
Recommended panel materialSteel/Aluminum
Coating typeZinc
Aluminum material ranges (5052, 6061, 7075)0.040″-0.125″
Steel material ranges (CRS, HRPO, HR)0.048″-0.119″