How to export from TinkerCAD?

TinkerCAD is a challenging platform for us to process, since it does not export true DXF files that we use for defining cutting paths. For this reason, we strongly suggest that you use one of our recommended software instead.

However there are a couple options available for exporting from TinkerCAD

Once your file is exported from either Fusion as a DXF or from Inkscape as an EPS at 1:1 scaling, you should be able to upload it directly to our website for an instant quote and confirm the overall dimensions are correct. Use our file setup checklist to ensure your 2D file is cut-ready!

Start your first SendCutSend project today!

Upload your CAD design or use our parts builder and get a free instant quote on your custom laser cut parts, all delivered to your door in a matter of days.

We proudly use hardware by PEM

Flush Standoff, 4-40, .250" Zinc plus Clear Chromate

SKU SO-440-8
Thread Size 4-40 x .250″
Hole size in sheet (+0.003/-.0.000) .168″
Minimum sheet thickness 0.040″
Maximum sheet thickness .125″
Fastener material Steel
Minimum distance hole C/L to edge 0.230″
When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. .345″
Recommended panel material Steel/Aluminum
Coating type Zinc
Length .250″
Aluminum material ranges (5052, 6061, 7075) 0.040″-0.125″
Steel material ranges (CRS, HRPO, HR) 0.048″-0.119″