Upload your CAD file or use our parts builder to get started.
Order 1 or 1,000+. Get up to 70% off when you order in bulk.
Order 1 or 1,000+. Get up to 70% off when you order in bulk.
Upload your CAD file, or use our Parts Builder and choose from a variety of templates.
Upload a CAD file or use our parts builder to get free instant quotes.
Free anywhere in the USA, and only $19 to Canada.
Free anywhere in the USA, and only $19 to Canada.
Follow your order from upload to delivery.
Follow your order from upload to delivery.
3-5 day shipping
on all standard orders
From prototype to full assembly, we have you covered every step of the way. We have over 15 finishing options, an extensive hardware catalog, and more!
We offer custom laser cutting, waterjet cutting, and CNC routing. We’ll cut your parts with the method best suited for your material.
Add dimension to your projects with our precision CNC bending services.
Select from our catalog of PEM press-fit hardware to add nuts, studs, and standoffs.
Enhance your custom laser cut parts with deburring, anodizing, and plating services.
Give your laser cut parts a bold, long-lasting finish and protective layer in one of 7 colors
Deburring is included FREE on orders with eliglble materials!
Choose from metals, composites, plastics, woods, and boards. If you can’t find what you need, send us a request!
“SendCutSend is a trusted partner my business can grow with. It doesn’t matter if I need one component or 10,000. SCS will fulfill any order, and they’ll do it with a rock-solid cost and time frame up front. Their consistency allows me to produce a quality product representative of my craftsman business that will also generate a profit.”
Yes, we are laser-fast, but we’re also secure, and offer 100% money-back guarantee on all our parts. You’re in good hands with us.
Our educated and friendly team is here to answer your questions and assist you in getting the best parts possible.
We make everything right here in the US at our facilities in Reno, Nevada and Paris, Kentucky. From cutting to bending to powder coating, to software engineering and customer support, your parts are truly made in the USA.
All our services come guaranteed. If you’re not 100% happy with your parts, we’ll give you a refund or remake on the spot.
We know your designs are valuable. Your files are 100% secure in our system.
If you don’t have a DXF file for laser cutting, no problem! You can now select, customize and order a variety of parts from simple brackets to house numbers in a matter of minutes.
“SendCutSend has completely changed the way in which I am able to fabricate. By pairing basic CAD software with my workflow, I’m able to create parts and pieces I had only dreamt of in years past, to a level of quality, fit, and finish that seemed all but impossible. SendCutSend has increased both my speed and efficiency, and has elevated the projects I build to a new level.”
Make sure all of the geometry in your laser cut part is at least 50% of the material thickness. As an example, if your material is 0.100” thick, the smallest hole you could expect to cut would be 0.050” in diameter. Any interior geometry smaller than 50% of the material thickness will not be
Before you upload your files to SendCutSend, make sure to check for these common problems. As an example, if your material is 0.100” thick, the smallest hole you could expect to cut would be 0.050” in diameter. A safe rule of thumb would be to keep all geometry greater than 1/2 material thickness, and
The minimum and maximum part size we offer changes depending on the material and its thickness. We have put together a chart broken down into four categories (Composites, Metals, Plastics, and Wood) so you can see all this information in the same place. This maximum size limit is determined partially by the machining process
We currently have a variety of materials that are available for tapping. 0.063”-0.500” 5052 Aluminum 0.063”-0.500” 6061 Aluminum 0.125”-0.250” 7075 Aluminum 0.063”-0.250” Copper 0.063”-0.250” Brass 0.030”-0.500” 304 Stainless Steel 0.062”-0.250” 316 Stainless Steel 0.030”-0.500” Mild Steel 0.050”-0.250” 4130 Chromoly 0.125”-0.250” Delrin 0.250”-0.500” HDPE 0.125”-0.250” ABS It’s important to choose the correct tap for your
Tabs are used to keep your parts from falling out of the parent sheet during laser cutting, waterjet cutting, or CNC routing. For laser cut and waterjet cut materials, we cut a bit of additional material about 0.010”-0.015” thick on the outside of your parts to create micro tabs. It’s easy enough to break
Powder coating will add a 7-10 day lead time to your order. If you are ordering both powder coated and non-powder coated parts, split your order into two so we can ship your non-powder coated parts as soon as they’re done being machined. If your powder coated parts are bent, be aware that the
Our pricing is based on a number of factors, including material, material thickness, material weight, quantity, shape (geometry), and the overall design. Follow these tips to get the lowest prices on your laser cut parts: Reduce the number of holes or “pierces” Eliminate duplicate lines and unnecessary geometry Keep your design smaller than 46”
Yes, you can powder coated bent and tapped parts but there are a few things to know. If your powder coated parts are bent, be aware that the die witness marks from the press brake will be visible through the coating. At this time, we cannot plug tapped holes before the parts are powder
Our founders, Jim and Jake, were always working on projects in their garage. They used the tools they had laying around to get the job done, but with compromises. When they tried to up their fabrication game by using custom made laser cut parts, none of the local shops wanted the work.
So they set out to find a new way, and SendCutSend was born.
This June, Spend $1,000 or more at checkout, you’ll receive 5% off instantly + a $200 gift card towards a future purchase.
"*" indicates required fields
Ready to order but don’t have your file handy? Enter your email below and we’ll send you a link for our desktop uploader.
We proudly use hardware by PEM
| SKU | SO-440-8 |
| Thread Size | 4-40 x .250″ |
| Hole size in sheet (+0.003/-.0.000) | .168″ |
| Minimum sheet thickness | 0.040″ |
| Maximum sheet thickness | .125″ |
| Fastener material | Steel |
| Minimum distance hole C/L to edge | 0.230″ |
| When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. | .314″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Length | .250″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.125″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.119″ |
